When you planning to purchase new transmission chains,every supplier or saler claim that they will provide excellent price to reduce your cost.You simply need to pay product cost,is it?
Well,in fact,when you plan to use transmission chains to fininsh your work,you need to pay for more cost,not only lubrication and replacement. What's just as important to consider is the total cost of ownership.To make things easier,you need to choose suitable chains materials to avoid some problem during using.
Stainless steel chain
The part data is stainless steel. This kind of chain is suitable for use in food industry and places prone to corrosion such as chemicals and drugs. It can also be used in upper and lower temperature places.
For this kind of chain, a U-shaped attachment plate is added to the external link section based on A and B series chains. Sticking rubber (such as Natural Rubber NR, silicone rubber Si, etc.) on the attachment plate can add wear ability, reduce noise and add shockproof ability.
Agricultural machinery chain
Agricultural machinery chain is applicable to field operation machinery, such as hand-held stretcher, thresher, combine harvester, etc. This kind of chain is required to be expensive, but can accept impact and wear resistance. In addition, the chain should be coated with grease or automatically smooth.
High strength chain
It is a special roller chain. After improving the shape of the chain plate, thickening the chain plate, fine punching the chain plate hole and strengthening the heat treatment of the pin shaft, it can improve the tensile strength by 15 ~ 30%, and has good impact function and fatigue function.
Side bending chain
This kind of chain has large hinge clearance and chain plate clearance, so it has great sensitivity and can be used for bending transmission and escort.
Agricultural clamping and escorting chain
Applicable to walking wheat and rice harvesters, stationary motorized rice and wheat threshers, and semi feeding combined harvesters.
Hollow pin chain
Used for escort, single pitch, double pitch and long pitch. Accessories or cross bars can pull out any link of the chain without assembling the chain.
It is used for the transmission between the crankshaft and camshaft of the engine. Since there are strict requirements and rules for the coordination of engine piston stroke and exhaust time, it is called this kind of useful chain. Roller chain and toothed chain can be used as time gauge chain. The timing chain is mainly used for the transmission of engines (diesel or gasoline engines) of automobiles, motorcycles and ships. In order to increase the weight of the starter, the gap between the chain and the device of the starter is very small, and some even do not have tensioning equipment. Therefore, in addition to the requirements for high precision, the requirements for wear-resistant function of the time gauge chain are also quite high.
It should go without saying that any reputable chain manufacturer will be using the highest quality materials (both plastics and metals) and that they'll be implementing the latest manufacturing procedures.